# text: "840AV built-in video. (This will cause the screen to flicker at startup)."
# item 3: CHECKBOX (0x05) enabled
# bounds: x1=10 y1=90 x2=280 y2=106
# text: "Save gamma table before dimming."
# item 4: CHECKBOX (0x05) enabled
# bounds: x1=10 y1=66 x2=221 y2=82
# text: "Spin down unmounted disks."
# item 5: CUSTOM (0x00) enabled
# bounds: x1=9 y1=57 x2=287 y2=58
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=99 y1=35 x2=197 y2=51
# text: "Expert options"
# item 7: CUSTOM (0x00) enabled
# bounds: x1=72 y1=6 x2=225 y2=30
# data: ""
# item 8: CHECKBOX (0x05) enabled
# bounds: x1=10 y1=114 x2=280 y2=130
# text: "Respond to Finder’s Sleep command"
# item 9: UNKNOWN (0x81) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 0001F03A
DITL_-4037_Other value.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=128 y1=48 x2=196 y2=68
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=48 y1=48 x2=112 y2=68
# text: "Cancel"
# item 2: EDIT_TEXT (0x10) enabled
# bounds: x1=188 y1=10 x2=228 y2=26
# text: ""
# item 3: TEXT (0x88) disabled
# bounds: x1=8 y1=10 x2=174 y2=26
# text: "Enter a delay in minutes:"
DITL_-4036_Brightness number.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=128 y1=48 x2=196 y2=68
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=48 y1=48 x2=112 y2=68
# text: "Cancel"
# item 2: EDIT_TEXT (0x10) enabled
# bounds: x1=188 y1=10 x2=216 y2=26
# text: "100"
# item 3: TEXT (0x88) disabled
# bounds: x1=8 y1=10 x2=180 y2=26
# text: "Brightness when dimmed:"
# item 4: TEXT (0x88) disabled
# bounds: x1=220 y1=10 x2=233 y2=26
# text: "%"
DITL_-4035_Nonexistent Query.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=260 y1=84 x2=328 y2=104
# text: "Yes"
# item 1: BUTTON (0x04) enabled
# bounds: x1=180 y1=84 x2=244 y2=104
# text: "No"
# item 2: TEXT (0x88) disabled
# bounds: x1=68 y1=8 x2=336 y2=72
# text: "Disk sleep is enabled for one or more disks that have been disconnected or are powered off. Shall I go ahead and disable sleep for those disks?"
# item 3: ICON (0xA0) disabled
# bounds: x1=16 y1=12 x2=48 y2=44
# ICON resource ID: 2
DITL_-4034_Gen. Error.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=215 y1=108 x2=295 y2=128
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=76 y1=8 x2=296 y2=96
# text: "^1"
DITL_-4033_Power Manager Error.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=312 y1=116 x2=392 y2=136
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=75 y1=8 x2=400 y2=104
# text: "Your Macintosh already has some built-in power management features. \n\nBecause you are using Sleeper instead, ^0.\n"
DITL_-4027_Old Energy Saver Controls.txt
# 14 entries
# item 0: CHECKBOX (0x05) enabled
# bounds: x1=16399 y1=78 x2=16685 y2=94
# text: "Power down monitor when idle"
# item 1: CUSTOM (0x80) disabled
# bounds: x1=34 y1=127 x2=70 y2=139
# data: ""
# item 2: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=16457 y1=126 x2=16735 y2=140
# CNTL resource ID: -4031
# item 3: CUSTOM (0x80) disabled
# bounds: x1=76 y1=140 x2=356 y2=153
# data: ""
# item 4: CHECKBOX (0x05) enabled
# bounds: x1=16416 y1=250 x2=16679 y2=266
# text: "Don’t wake up for mouse movement"
# item 5: CHECKBOX (0x05) enabled
# bounds: x1=16416 y1=232 x2=16724 y2=248
# text: "Power down only when screen is dimmed"
# item 6: CHECKBOX (0x05) enabled
# bounds: x1=16416 y1=169 x2=16706 y2=185
# text: "Power off monitor (no power) after:"
# item 7: CHECKBOX (0x05) enabled
# bounds: x1=16416 y1=106 x2=16706 y2=122
# text: "Suspend monitor (low power) after:"
# item 8: CUSTOM (0x80) disabled
# bounds: x1=27 y1=161 x2=358 y2=163
# data: ""
# item 9: CUSTOM (0x80) disabled
# bounds: x1=34 y1=190 x2=70 y2=202
# data: ""
# item 10: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=16457 y1=189 x2=16735 y2=203
# CNTL resource ID: -4031
# item 11: CUSTOM (0x80) disabled
# bounds: x1=76 y1=203 x2=356 y2=216
# data: ""
# item 12: CUSTOM (0x80) disabled
# bounds: x1=17 y1=98 x2=368 y2=274
# data: ""
# item 13: CUSTOM (0x80) disabled
# bounds: x1=27 y1=224 x2=358 y2=226
# data: ""
DITL_-4026_Password Controls.txt
# 9 entries
# item 0: CHECKBOX (0x05) enabled
# bounds: x1=16399 y1=77 x2=16647 y2=93
# text: "Require password"
# item 1: BUTTON (0x04) enabled
# bounds: x1=16523 y1=229 x2=16630 y2=249
# text: "Set Password"
# item 2: RADIO_BUTTON (0x06) enabled
# bounds: x1=16416 y1=109 x2=16601 y2=125
# text: "On screen saver wakeup"
# item 3: RADIO_BUTTON (0x06) enabled
# bounds: x1=16416 y1=127 x2=16601 y2=143
# text: "On monitor power-up"
# item 4: RADIO_BUTTON (0x06) enabled
# bounds: x1=16416 y1=145 x2=16530 y2=161
# text: "When idle for:"
# item 5: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=16437 y1=167 x2=16712 y2=181
# CNTL resource ID: -4030
# item 6: CUSTOM (0x80) disabled
# bounds: x1=59 y1=181 x2=326 y2=194
# data: ""
# item 7: CUSTOM (0x80) disabled
# bounds: x1=26 y1=206 x2=358 y2=208
# data: ""
# item 8: CUSTOM (0x80) disabled
# bounds: x1=17 y1=98 x2=368 y2=274
# data: ""
DITL_-4025_Screen Saver Controls.txt
# 22 entries
# item 0: CHECKBOX (0x05) enabled
# bounds: x1=16399 y1=77 x2=16535 y2=93
# text: "Use screen saver"
# item 1: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=16467 y1=110 x2=16742 y2=124
# CNTL resource ID: -4030
# item 2: RADIO_BUTTON (0x06) enabled
# bounds: x1=16602 y1=214 x2=16618 y2=230
# text: ""
# item 3: RADIO_BUTTON (0x06) enabled
# bounds: x1=16602 y1=245 x2=16618 y2=261
# text: ""
# item 4: RADIO_BUTTON (0x06) enabled
# bounds: x1=16555 y1=245 x2=16571 y2=261
# text: ""
# item 5: RADIO_BUTTON (0x06) enabled
# bounds: x1=16555 y1=214 x2=16571 y2=230
# text: ""
# item 6: RADIO_BUTTON (0x06) enabled
# bounds: x1=16685 y1=214 x2=16701 y2=230
# text: ""
# item 7: RADIO_BUTTON (0x06) enabled
# bounds: x1=16685 y1=245 x2=16701 y2=261
# text: ""
# item 8: RADIO_BUTTON (0x06) enabled
# bounds: x1=16638 y1=245 x2=16654 y2=261
# text: ""
# item 9: RADIO_BUTTON (0x06) enabled
# bounds: x1=16638 y1=214 x2=16654 y2=230
# text: ""
# item 10: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=16467 y1=143 x2=16742 y2=157
# CNTL resource ID: -4032
# item 11: CUSTOM (0x80) disabled
# bounds: x1=46 y1=110 x2=79 y2=122
# data: ""
# item 12: CUSTOM (0x00) enabled
# bounds: x1=169 y1=212 x2=236 y2=263
# data: ""
# item 13: CUSTOM (0x00) enabled
# bounds: x1=252 y1=212 x2=319 y2=263
# data: ""
# item 14: CUSTOM (0x80) disabled
# bounds: x1=84 y1=157 x2=363 y2=170
# data: ""
# item 15: CUSTOM (0x80) disabled
# bounds: x1=23 y1=143 x2=79 y2=155
# data: ""
# item 16: CUSTOM (0x80) disabled
# bounds: x1=89 y1=124 x2=356 y2=137
# data: ""
# item 17: CHECKBOX (0x05) enabled
# bounds: x1=16408 y1=209 x2=16535 y2=225
# text: "Use hot corners:"
# item 18: CHECKBOX (0x05) enabled
# bounds: x1=16408 y1=191 x2=16742 y2=207
# text: "Don’t wake up for mouse movement"
# item 19: CUSTOM (0x80) disabled
# bounds: x1=26 y1=181 x2=358 y2=183
# data: ""
# item 20: CUSTOM (0x80) disabled
# bounds: x1=17 y1=98 x2=368 y2=274
# data: ""
# item 21: UNKNOWN (0x81) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 0001F047
DITL_-4024_Energy Saver Controls.txt
# 16 entries
# item 0: CHECKBOX (0x05) enabled
# bounds: x1=16399 y1=77 x2=16629 y2=93
# text: "Power down monitor when idle"
# item 1: CUSTOM (0x80) disabled
# bounds: x1=34 y1=107 x2=70 y2=119
# data: ""
# item 2: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=16457 y1=107 x2=16735 y2=121
# CNTL resource ID: -4031
# item 3: CUSTOM (0x80) disabled
# bounds: x1=76 y1=121 x2=356 y2=134
# data: ""
# item 4: CHECKBOX (0x05) enabled
# bounds: x1=16416 y1=183 x2=16679 y2=199
# text: "Don’t wake up for mouse movement"
# item 5: CHECKBOX (0x05) enabled
# bounds: x1=16416 y1=165 x2=16724 y2=181
# text: "Power down only when screen is dimmed"
# item 6: RADIO_BUTTON (0x06) enabled
# bounds: x1=16543 y1=139 x2=16633 y2=155
# text: "Power off"
# item 7: RADIO_BUTTON (0x06) enabled
# bounds: x1=16455 y1=139 x2=16533 y2=155
# text: "Suspend"
# item 8: CUSTOM (0x80) disabled
# bounds: x1=27 y1=160 x2=358 y2=162
# data: ""
# item 9: CUSTOM (0x80) disabled
# bounds: x1=34 y1=240 x2=70 y2=252
# data: ""
# item 10: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=16457 y1=240 x2=16735 y2=254
# CNTL resource ID: -4031
# item 11: CUSTOM (0x80) disabled
# bounds: x1=76 y1=254 x2=356 y2=267
# data: ""
# item 12: CUSTOM (0x80) disabled
# bounds: x1=17 y1=98 x2=368 y2=206
# data: ""
# item 13: CUSTOM (0x80) disabled
# bounds: x1=17 y1=233 x2=368 y2=274
# data: ""
# item 14: CHECKBOX (0x05) enabled
# bounds: x1=16399 y1=212 x2=16685 y2=228
# text: "Shut down computer when idle"
# item 15: CUSTOM (0x80) disabled
# bounds: x1=34 y1=141 x2=70 y2=153
# data: ""
DITL_-4023_Disk Sleep Controls.txt
# 28 entries
# item 0: CHECKBOX (0x05) enabled
# bounds: x1=16399 y1=77 x2=16625 y2=93
# text: "Spin down disks when inactive"
# item 1: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=16457 y1=107 x2=16735 y2=121
# CNTL resource ID: -4031
# item 2: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=16455 y1=146 x2=16579 y2=167
# CNTL resource ID: -4033
# item 3: CHECKBOX (0x05) enabled
# bounds: x1=16588 y1=147 x2=16606 y2=165
# text: ""
# item 4: CHECKBOX (0x05) enabled
# bounds: x1=16610 y1=147 x2=16628 y2=165
# text: ""
# item 5: CHECKBOX (0x05) enabled
# bounds: x1=16632 y1=147 x2=16650 y2=165
# text: ""
# item 6: CHECKBOX (0x05) enabled
# bounds: x1=16654 y1=147 x2=16672 y2=165
# text: ""
# item 7: CHECKBOX (0x05) enabled
# bounds: x1=16676 y1=147 x2=16693 y2=165
# text: ""
# item 8: CHECKBOX (0x05) enabled
# bounds: x1=16698 y1=147 x2=16715 y2=165
# text: ""
# item 9: CHECKBOX (0x05) enabled
# bounds: x1=16720 y1=147 x2=16737 y2=165
# text: ""
# item 10: CUSTOM (0x80) disabled
# bounds: x1=207 y1=163 x2=218 y2=175
# data: ""
# item 11: CUSTOM (0x80) disabled
# bounds: x1=229 y1=163 x2=240 y2=175
# data: ""
# item 12: CUSTOM (0x80) disabled
# bounds: x1=251 y1=163 x2=262 y2=175
# data: ""
# item 13: CUSTOM (0x80) disabled
# bounds: x1=273 y1=163 x2=284 y2=175
# data: ""
# item 14: CUSTOM (0x80) disabled
# bounds: x1=294 y1=163 x2=306 y2=175
# data: ""
# item 15: CUSTOM (0x80) disabled
# bounds: x1=316 y1=163 x2=328 y2=175
# data: ""
# item 16: CUSTOM (0x80) disabled
# bounds: x1=339 y1=163 x2=350 y2=175
# data: ""
# item 17: CUSTOM (0x80) disabled
# bounds: x1=27 y1=107 x2=63 y2=119
# data: ""
# item 18: CUSTOM (0x80) disabled
# bounds: x1=28 y1=150 x2=62 y2=162
# data: ""
# item 19: CUSTOM (0x80) disabled
# bounds: x1=76 y1=121 x2=356 y2=134
# data: ""
# item 20: CHECKBOX (0x05) enabled
# bounds: x1=16416 y1=204 x2=16698 y2=220
# text: "Spin down only when screen is dimmed"
# item 21: CHECKBOX (0x05) enabled
# bounds: x1=16416 y1=188 x2=16625 y2=204
# text: "Spin down all disks together"
# item 22: CHECKBOX (0x05) enabled
# bounds: x1=16416 y1=220 x2=16625 y2=236
# text: "Wake up all disks together"
# item 23: CUSTOM (0x80) disabled
# bounds: x1=200 y1=135 x2=354 y2=149
# data: ""
# item 24: CHECKBOX (0x05) enabled
# bounds: x1=16416 y1=236 x2=16716 y2=252
# text: "Wake up disks while powering up monitor"
# item 25: CUSTOM (0x80) disabled
# bounds: x1=26 y1=180 x2=358 y2=182
# data: ""
# item 26: CHECKBOX (0x05) enabled
# bounds: x1=16416 y1=252 x2=16747 y2=268
# text: "Spin back down after wake up if Mac is idle"
# item 27: CUSTOM (0x80) disabled
# bounds: x1=17 y1=98 x2=368 y2=274
# data: ""
DITL_-4022_Hotkey Controls.txt
# 13 entries
# item 0: CHECKBOX (0x05) enabled
# bounds: x1=16399 y1=77 x2=16562 y2=93
# text: "Activate with hotkey"
# item 1: BUTTON (0x04) enabled
# bounds: x1=16530 y1=198 x2=16630 y2=218
# text: "Set Hotkey"
# item 2: CUSTOM (0x80) disabled
# bounds: x1=84 y1=113 x2=341 y2=129
# data: ""
# item 3: CUSTOM (0x80) disabled
# bounds: x1=39 y1=115 x2=74 y2=127
# data: ""
# item 4: CHECKBOX (0x05) enabled
# bounds: x1=16462 y1=140 x2=16550 y2=156
# text: "Disk Sleep"
# item 5: CHECKBOX (0x05) enabled
# bounds: x1=16462 y1=158 x2=16559 y2=174
# text: "Energy Star"
# item 6: CHECKBOX (0x05) enabled
# bounds: x1=16583 y1=140 x2=16690 y2=156
# text: "Screen Saver"
# item 7: CHECKBOX (0x05) enabled
# bounds: x1=16583 y1=158 x2=16680 y2=174
# text: "Password"
# item 8: CUSTOM (0x80) disabled
# bounds: x1=26 y1=142 x2=74 y2=154
# data: ""
# item 9: CUSTOM (0x80) disabled
# bounds: x1=80 y1=111 x2=345 y2=131
# data: ""
# item 10: CUSTOM (0x80) disabled
# bounds: x1=17 y1=98 x2=368 y2=234
# data: ""
# item 11: CUSTOM (0x80) disabled
# bounds: x1=26 y1=182 x2=358 y2=184
# data: ""
# item 12: CHECKBOX (0x05) enabled
# bounds: x1=16399 y1=249 x2=16733 y2=265
# text: "Flash keyboard LEDs when attention is required"
DITL_-4021_Code info.txt
# 7 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=100 y1=131 x2=168 y2=151
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=59 y1=36 x2=210 y2=52
# text: "Currently loaded code"
# item 2: TEXT (0x88) disabled
# bounds: x1=12 y1=69 x2=256 y2=85
# text: ""
# item 3: TEXT (0x88) disabled
# bounds: x1=12 y1=85 x2=256 y2=101
# text: ""
# item 4: TEXT (0x88) disabled
# bounds: x1=12 y1=101 x2=256 y2=117
# text: ""
# item 5: CUSTOM (0x00) enabled
# bounds: x1=6 y1=60 x2=262 y2=61
# data: ""
# item 6: CUSTOM (0x00) enabled
# bounds: x1=58 y1=4 x2=211 y2=28
# data: ""
DITL_-4020_Register.txt
# 8 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=330 y1=209 x2=398 y2=229
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=164 y1=210 x2=300 y2=230
# text: "Register Online"
# item 2: BUTTON (0x04) enabled
# bounds: x1=16 y1=210 x2=152 y2=230
# text: "Registration Form"
# item 3: TEXT (0x88) disabled
# bounds: x1=16 y1=12 x2=400 y2=36
# text: "Sleeper is $25 shareware. When you register, you receive free updates, technical support, and a registration code to disable Sleeper’s shareware reminders."
# item 4: TEXT (0x88) disabled
# bounds: x1=28 y1=117 x2=400 y2=153
# text: "2. Run the “Register SCS” application to create a registration form. Addresses for sending your registration via email, mail, and fax are included on the form. The “Registration Form” button below will launch Register SCS for you. \n"
# item 5: TEXT (0x88) disabled
# bounds: x1=28 y1=74 x2=400 y2=110
# text: "1. On the Internet, go to <http://order.kagi.com/?ST&S> to register with a credit card at Kagi’s secure web site. If you have Internet Config installed, the “Register Online” button below will send your web browser there. "
# item 6: TEXT (0x88) disabled
# bounds: x1=16 y1=160 x2=400 y2=196
# text: "After Kagi receives your payment, you will receive a registration code via email or postal mail. Order processing can take up to a week, and it will take longer to get your registration code if you do not provide a correct email address."
# item 7: TEXT (0x88) disabled
# bounds: x1=16 y1=43 x2=400 y2=67
# text: "Registrations are handled by Kagi, a payment processing service. To register, do one of the following:\n"
DITL_-2002_Register.txt
# 10 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=274 y1=154 x2=344 y2=174
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=191 y1=154 x2=261 y2=174
# text: "Cancel"
# item 2: EDIT_TEXT (0x10) enabled
# bounds: x1=117 y1=55 x2=341 y2=71
# text: ""
# item 3: EDIT_TEXT (0x10) enabled
# bounds: x1=117 y1=86 x2=341 y2=102
# text: ""
# item 4: TEXT (0x88) disabled
# bounds: x1=15 y1=55 x2=99 y2=71
# text: "Your Name:"
# item 5: TEXT (0x88) disabled
# bounds: x1=15 y1=86 x2=106 y2=102
# text: "Organization:"
# item 6: TEXT (0x88) disabled
# bounds: x1=14 y1=11 x2=302 y2=32
# text: "Please enter your registration information"
# item 7: EDIT_TEXT (0x10) enabled
# bounds: x1=171 y1=117 x2=341 y2=133
# text: ""
# item 8: TEXT (0x88) disabled
# bounds: x1=15 y1=117 x2=167 y2=133
# text: "Registration Number:"
# item 9: CUSTOM (0x80) disabled
# bounds: x1=10 y1=36 x2=348 y2=37
# data: ""
DITL_-2001_Gen. Error.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=280 y1=112 x2=360 y2=132
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=76 y1=8 x2=364 y2=104
# text: "^1"
DITL_-2000_Launch failed.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=215 y1=108 x2=295 y2=128
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=76 y1=8 x2=296 y2=96
# text: "Sorry, but the application “^0” that came with ^1 could not be launched (^2). Please find it and launch it manually."